🚀 Multiplex Customized ELISA Kits – Accuracy, Efficiency, Innovation in Every Assay!
Get In Touch

(814) 262-7331

Request a Callback

info@labiostring.com

Human MOG(Myelin-oligodendrocyte Glycoprotein) ELISA Kit

Elisa Kit

Human MOG(Myelin-oligodendrocyte Glycoprotein) ELISA Kit

Catalogue No BSEK-413H
Species Human
Size 96 T | 48 T
Price POR
Request a Quote
SKU: BSEK-413H Categories: ,
Sensitivity 0.094ng/ml
Range 0.156-10ng/ml
Alternative Name Myelin-oligodendrocyte glycoprotein ELISA Kit, MOG ELISA Kit
Uni Prot ID Q16653
Sample Type Serum, Plasma, Cell Culture Supernatant, cell or tissue lysate, Other liquid samples
Detection Method Sandwich ELISA, Double Antibody
Wavelength OD450
Reaction Duration 4 hours
Storage 2-8°C(Sealed), Don't cryopreserve.
Specificity Specifically binds with MOG , no obvious cross reaction with other analogues
Principle This kit is based on Double antibody-Sandwich ELISA detection method and takes 4h assay time. The microplate provided in this kit has been precoated with anti MOG antibody. Add standard and properly diluted sample into relevant well respectively. After incubation, wash unbound components. Add biotinylated detection antibody. Then, it binds with MOG bound to precoated antibody. Wash unbound components and add HRP-Streptavidin Conjugate (SABC). Wash unbound components again and add TMB substrate solution. Then, TMB was catalyzed by HRP to produce a blue color product that turned yellow after adding a stop solution. Read the O.D. absorbance at 450nm in a microplate reader. Calculate the concentration of MOG in the sample by plotting standard curve. The concentration of the target substance is proportional to the OD450 value.

 

 

 

 

 

This product is detected by QC department and meets performance required in the manual. (Laboratory Humidity: 20%-60%; Temperature: 18°C -25°C; Equilibrate TMB substrate to 37°C before staining. After adding into the ELISA wells, incubate for 15min at 37°C in dark.) Due to different assay environments and operations, assay data below and standard curve are provided for reference. Experimenters should establish standard curve according to their own assay.

STD.(ng/ml) OD-1 OD-2 Average
0 0.071 0.073 0.072
0.156 0.12 0.124 0.122
0.312 0.238 0.244 0.241
0.625 0.41 0.422 0.416
1.25 0.621 0.639 0.63
2.5 0.905 0.931 0.918
5 1.511 1.555 1.533
10 2.131 2.193 2.162

Add a certain amount of MOG into the sample. Calculate the recovery by comparing the measured value with the expected amount of MOG in the sample.

Sample Type Recovery Range(%) Average(%)
serum(n=10) 88-104 96
EDTA plasma(n=10) 88-100 92
Heparin plasma(n=10) 86-103 95

Dilute the sample with a certain amount of MOG at 1:2, 1:4 and 1:8 to get the recovery range.

Sample Type 1:2 1:4 1:8
serum(n=10) 89-98% 90-105% 86-105%
EDTA plasma(n=10) 84-95% 82-101% 89-98%
Heparin plasma(n=10) 87-97% 85-97% 84-99%

Intra-assay Precision: samples with low, medium and high concentration are tested 20 times on the same plate. Inter-assay Precision: samples with low, medium and high concentration are tested 20 times on three different plates.

Item Intra-assay Precision Inter-assay Precision
Sample 1 2 3 1 2 3
n 20 20 20 20 20 20
Mean (ng/ml) 0.31 1.26 5.07 0.34 1.2 5.18
Standard deviation 0.02 0.07 0.25 0.02 0.06 0.27
CV(%) 4.93 5.22 4.89 4.82 4.68 5.12

Perform the stability test for the sealed kit at 37°C and 2-8°C and get relevant data.

ELISA kit(n=5) 37°C for 1 month 2-8°C for 6 months
Average(%) 80 95-100