🚀 Multiplex Customized ELISA Kits – Accuracy, Efficiency, Innovation in Every Assay!
Get In Touch

(814) 262-7331

Request a Callback

info@labiostring.com

Human AIM2 (Interferon-inducible protein AIM2) Elisa Kit

Biostring > Products > Human AIM2 (Interferon-inducible protein AIM2) Elisa Kit
Elisa Kit

Human AIM2 (Interferon-inducible protein AIM2) Elisa Kit

Catalogue No BSEK-281H
Species Human
Size 96 T | 48 T
Price POR
Contact Us
SKU: BSEK-281H Categories: ,
Human AIM2 (Interferon-inducible protein AIM2) Elisa Kit
Sensitivity 0.094ng/ml
Range 0.156-10ng/ml
Alias Interferon-inducible protein AIM2 ELISA Kit, Absent in melanoma 2 ELISA Kit, AIM2 ELISA Kit
Sample Type Serum, Plasma, Cell Culture Supernatant, cell or tissue lysate, Other liquid samples
Detection Method Sandwich ELISA, Double Antibody
Detection Wavelength OD450
Reaction Duration 4 hours
Storage 2-8°C(Sealed), Don't cryopreserve.
Specificity Specifically binds with AIM2 , no obvious cross reaction with other analogues.
UniProt ID O14862
Principle This kit is based on Double antibody-Sandwich ELISA detection method and takes 4h assay time. The microplate provided in this kit has been precoated with anti AIM2 antibody. Add standard and properly diluted sample into relevant well respectively. After incubation, wash unbound components. Add biotinylated detection antibody. Then, it binds with AIM2 bound to precoated antibody. Wash unbound components and add HRP-Streptavidin Conjugate (SABC). Wash unbound components again and add TMB substrate solution. Then, TMB was catalyzed by HRP to produce a blue color product that turned yellow after adding a stop solution. Read the O.D. absorbance at 450nm in a microplate reader. Calculate the concentration of AIM2 in the sample by plotting standard curve. The concentration of the target substance is proportional to the OD450 value.

 

 

 

 

 

This product is detected by QC department and meets performance required in the manual. (Laboratory Humidity: 20%-60%; Temperature: 18°C -25°C; Equilibrate TMB substrate to 37°C before staining. After adding into the ELISA wells, incubate for 15min at 37°C in dark.) Due to different assay environments and operations, assay data below and standard curve are provided for reference. Experimenters should establish standard curve according to their own assay.

STD.(ng/ml) OD-1 OD-2 Average
0 0.108 0.112 0.11
0.156 0.176 0.182 0.179
0.312 0.21 0.216 0.213
0.625 0.294 0.302 0.298
1.25 0.454 0.468 0.461
2.5 0.845 0.869 0.857
5 1.361 1.401 1.381
10 2.177 2.241 2.209

Add a certain amount of AIM2 into the sample. Calculate the recovery by comparing the measured value with the expected amount of AIM2 in the sample.

Sample Type Recovery Range(%) Average(%)
serum(n=10) 89-103 95
EDTA plasma(n=10) 91-102 96
Heparin plasma(n=10) 85-98 92

Dilute the sample with a certain amount of AIM2 at 1:2, 1:4 and 1:8 to get the recovery range.

Sample Type 1:2 1:4 1:8
serum(n=10) 85-103% 89-104% 88-98%
EDTA plasma(n=10) 85-97% 83-100% 83-97%
Heparin plasma(n=10) 86-100% 85-99% 80-99%

Intra-assay Precision: samples with low, medium and high concentration are tested 20 times on the same plate.

Inter-assay Precision: samples with low, medium and high concentration are tested 20 times on three different plates.

Item Intra-assay Precision Inter-assay Precision
Sample 1 2 3 1 2 3
n 20 20 20 20 20 20
Mean (ng/ml) 0.32 1.2 4.89 0.32 1.24 5.1
Standard deviation 0.02 0.06 0.21 0.02 0.07 0.24
CV(%) 5.23 4.96 4.23 5.91 5.26 4.68

Perform the stability test for the sealed kit at 37°C and 2-8°C and get relevant data.

ELISA kit(n=5) 37°C for 1 month 2-8°C for 6 months
Average(%) 80 95-100