|
Porcine IL-10(Interleukin 10) ELISA Kit |
|
Sensitivity |
18.75 pg/mL |
|
Range |
31.25-2000pg/mL |
|
Alternative Names |
IL10, IL10A, CSIF, TGIF |
|
Standard |
2000pg/mL |
|
Sample type |
Serum, Plasma, Tissue homogenates, Cell lysates, Cell culture supernates and Other biological fluids |
|
Reaction time |
3.5H |
|
Research Area |
N/A |
|
Uniprot ID |
N/A |
|
Principle |
This ELISA kit uses the Sandwich-ELISA principle. The micro ELISA plate provided in this kit has been pre-coated with an antibody specific to Porcine IL-10. Standards or samples are added to the micro ELISA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Porcine IL-10 and Avidin-Horseradish Peroxidase (HRP) conjugate are added successively to each micro plate well and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Porcine IL-10, biotinylated detection antibody and Avidin-HRP conjugate will appear blue in color. The enzyme-substrate reaction is terminated by the addition of stop solution and the color turns yellow. The optical density (OD) is measured spectrophotometrically at a wavelength of 450 nm ± 2 nm. The OD value is proportional to the concentration of Porcine IL-10. You can calculate the concentration of Porcine IL-10 in the samples by comparing the OD of the samples to the standard curve. |
|
Validated Image |
|
|
Porcine interleukin 10 (IL-10) ELISA Kit |
|
Sensitivity |
0.6pg/ml |
|
Range |
3.3pg/ml-200pg/ml |
|
Sample Volume |
10ul |
|
Standard |
270 pg/ml |
|
Detection Method |
Quantitative Detection |
|
Wavelength |
450nm |
|
Sample Type |
For use with serum, plasma, culture media, or any biological fluids.For use with serum, plasma, culture media, or any biological fluids. |
|
Intended Use |
Enzyme immunoassay for the quantitative detection of Porcine IL-10 antigen in serum, plasma, culture media, or any biological fluid. |
|
Principle |
The quantitative detection of Porcine IL-10 antigen is based on the ELISA (Enzyme-Linked Immunosorbent Assay) technique. The microplate wells are pre-coated with an antibody specific to Porcine IL-10. After incubation, the corresponding antigen in the sample or standards will bind to the immobilized antibody. After washing the microplate wells to remove all unbound sample material, horseradish peroxidase (HRP) labeled antibody conjugate is added, which binds to the antigen, forming antibody-antigen-enzyme-labeled antibody complex upon incubation. In a second wash step, all unbound material is removed. The immune complex formed by the bound conjugate is visualized by adding Tetramethylbenzidine (TMB) substrate, which gives a blue color reaction in wells containing the complex. A stop solution containing acid terminates the reaction, producing a yellow end-point coloration proportional to the amount of specific antigen present in the sample. Absorbance is measured at 450 nm using an ELISA microwell plate reader. Analysis is completed by comparing the OD values of samples to the standard curve. |
